Omron ZW-8000 Series User Manual page 222

System
Communications
setting
[SYSTEM]
(cont'd)
*1. For more detail, refer to the following.
"6-4 Connecting by No-protocol Communications" described in Displacement Sensor ZW-8000/7000/5000 series
Confocal Fiber Type Displacement Sensor User's Manual for Communications Settings (Z363).
*2. For more detail, refer to the following.
"6-3 Connecting with EtherNet/IP" described in Displacement Sensor ZW-8000/7000/5000 series Confocal Fiber Type
Displacement Sensor User's Manual for Communications Settings (Z363)
220
Search from Menu Tree
RS-232C
[COM] [RS232C]
Ethernet
[ETN]
Delimiter
[DELIMI]
Fieldbus
[MEMLINK]
GATE signal
ON time
[GATE.TM]
Setting Option/Setting Range
Data length
7bit [7BIT]/8bit [8BIT]*
[DATA]
Parity None [OFF]*/Odd [ODD]/
[PARITY] Even [EVEN]
Stop bit
1bit [1BIT]*/2 bit [2BIT]
[STOP]
Baud rate
9600/19200/38400*/57600/115200
[BAUD.RT]
CS/RS
Off [OFF]*/On [ON]
[CS/RS]
IP address 1
[IPADDR] 1 to 223 (default value: 192)
[IP1]
IP address 2
0 to 255 (default value: 168)
[IP2]
IP address 3
0 to 255 (default value: 250)
[IP3]
IP address 4
1 to 254 (default value: 50)
[IP4]
Subnet mask1
[SUBNET] 0 to 255 (default value: 255)
[SUB1]
Subnet mask2
0 to 255 (default value: 255)
[SUB2]
Subnet mask3
0 to 255 (default value: 255)
[SUB3]
Subnet mask4
0 to 255 (default value: 0)
[SUB4]
Protocol
Off [OFF]/ TCP/Server [TCP.SV]*/
selection
TCP/Client [TCP.CL]/UDP [UDP]
[PROTCL]
Output IP
address 1
1 to 223 (default value: 192)
[OUTIP]
[IP1]
Output IP
address 2 0 to 255 (default value: 168)
[IP2]
Output IP
address 3 0 to 255 (default value: 250)
[IP3]
Output IP
address 4 1 to 254 (default value: 100)
[IP4]
Port numbers
0 to 65535 (default value: 9601)
[PORT.IN]
Output
destination
0 to 65535 (default value: 9601)
port No.
[PORT.OT]
Delimiter
CR [CR] */LF [LF]/CR+LF [CRLF]
[DELIMI]
Fieldbus Off [OFF]/ EtherNet/IP [EIP]/
[MEM.LINK] EtherCAT [E-CAT]*
GATE signal
ON 0 to 100 (default value: 1)
[GATE.TM]
* default value
Pages
*1
*2
*1
−
−
ZW-8000/7000/5000
User's Manual