Omron ZW-8000 Series User Manual page 261

Setting the Zero Reset Memory
Setting the Zero Reset Memory p.172
As an example, here is an explanation of the procedure for selecting the "ON" (enabled) zero reset memory
setting.
Operating procedure
Steps Key operation
1
2
3
4
5
ZW-8000/7000/5000
User's Manual
Display Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
Press the
key.
Press the
Select zero reset memory ON/OFF.
The current setting value is displayed on the sub-display.
Press
In this example, select "ON" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/ keys to select "SYSTEM" and press the
/ keys to select "ZER.MEM" and press the
key.
/ key to enter editing mode and the sub-display blinks.
key for two seconds or more to enter the
Setting the Output Conditions
key.
259