Table of Contents
Advertisement
Installing on bottom
The following describes how to attach the Sensor Controller on its bottom.
1
Drill four installation holes on the base.
Important
For the location installation holes, see the external
dimensions.
9-1 Specifications and External Dimensions
p.288
2
Tighten four M4 screws to fix the Sensor Controller
on the base.
Tightening torque: 1.2 N · m
Sensor Controller thread depth: 6 mm
68
Installation
M4 screw × 4
ZW-8000/7000/5000
User's Manual
Advertisement
Table of Contents
Troubleshooting
