Omron ZW-8000 Series User Manual page 310

Item
External I/F Ethernet
EtherCAT
RS-232C
Analog
output
terminal
block
32-pole
expan-
sion con-
nector
308
Specifications and External Dimensions
Specifications
ZW-8000@
100BASE-TX/10BASE-T, Non-procedure (TCP/UDP), EtherNet/IP
EtherCAT exclusive protocol 100BASE-TX
Max. 115,200 bps
-10 V to +10 V, output impedance: 100 Ω
Analog voltage output
(OUT V)
4 mA to 20 mA, max. load resistance: 300 Ω
Analog current output
(OUT A)
Judgment output Transistor output system
(HIGH/PASS/LOW) Output voltage: 21.6 to 30 VDC
Load current: 50 mA or less
Busy output (BUSY)
Residual voltage when turning ON: 2 V or less
Leakage voltage when turning OFF: 0.1 mA or less
Alarm output (ALARM)
Enable output
(ENABLE)
Sync flag output
(SYNFLG)
Trigger busy output
(TRIGBUSY)
Logging state output
(LOGSTAT)
Logging error output
(LOGERR)
Stability output
(STABILITY)
Task state output
(TASKSTAT)
LIGHT OFF input DC input system
(LIGHT OFF) Input voltage: 24 VDC ± 10% (21.6 to 26.4 VDC)
Input current: 7 mA Type. (24 VDC)
Zero reset input
ON voltage/ON current: 19 V/3 mA or more
(ZERO)
OFF voltage/OFF current: 5 V/1 mA or less
Timing input (TIMING)
Reset input (RESET)
Sync input
(SYNC)
Trigger input
(TRIG)
Logging input
(LOGGING)
Bank Currently Transistor output system
selected Output voltage: 21.6 to 30 VDC
bank output Load current: 50 mA or less
(BANK_OUT Residual voltage when turning ON: 2 V or less
1 to 3) Leakage voltage when turning OFF: 0.1 mA or less
Bank DC input system
Selection Input voltage: 24 VDC ± 10% (21.6 to 26.4 VDC)
input Input current: 7 mA Type. (24 VDC)
(BANK_SEL ON voltage/ON current: 19 V/3 mA or more
1 to 3) OFF voltage/OFF current: 5 V/1 mA or less
ZW-7000@ ZW-5000@
ZW-8000/7000/5000
User's Manual