Omron ZW-8000 Series User Manual page 42

For ZW-5000 Series
1
Turn the threaded section of the fiber cable counter-clockwise. When the screw comes off, pull
the cable out.
Important
• Handling fiber cables
Use them in compliance with the following. This may result in damage to the fiber cable.
- Fiber cable bend radiuses must be at least 20 mm.
- Do not yank hard on a fiber cable.
- Do not step on a fiber cable or place anything heavy on it.
- Do not apply any twisting stress to the fiber cable.
- Do not forcefully insert, or bend, or twist in a manner that would cause stress on the fiber connector when
connecting it.
- Do not let bending cause stress at the root section of a fiber connector and connection.
• Do not touch the end surface of a fiber cable, or the cable may be degraded in performance. Should the end surface
be touched or soiled, wipe the dirt away using a commercially available cleaner exclusive for fiber or dry and soft
cloth. Do not use a cloth moistened with alcohol, or the dirt may be reattached.
• Use the optional ZW-XCL or a commercially available fiber cleaner when cleaning the sensor controller fiber
connector. For how to clean the fiber connector using ZW-XCL, refer to the
cable using ZW-XCL
• If you frequently insert and extract the Sensor Head, recommend to use the commercially available fiber cleaner
which can use repeatedly.
●
ZW-7000 Series
Product name
NEOCLEAN-M
●
ZW-8000/5000 Series
Product name
OPTIPOP R1
40
Basic Operations for Displaying Measurement Results
.
Model Manufacture
ATC-NE-M1 NTT Advanced Technology Corporation
Model Manufacture
ATC-RE-01 NTT Advanced Technology Corporation
Cleaning the fiber connector and fiber
ZW-8000/7000/5000
User's Manual