ZW-7000 Series
Connect the Fiber cable and Calibration ROM to the Sensor Controller.
Make sure to have the bush section of the Fiber cable when you connect to the Fiber cable.
Cariblation
ROM
Fiber cable
When install the Fiber cable
Grasp the bushing section of Fiber adapter.
Mate the Convex of fiber connector with the
groove on the fiber adapter, and insert.
Important
If you grasp the fiber connector, it cannot be connected correctly.
ZW-8000/7000/5000
User's Manual
Groove of fiber
adapter
Fiber connector
Convex of fiber connector
Basic Operations for Displaying Measurement Results
Convex of fiber
connector
Bush section
Fiber
adapter
37