Omron ZW-8000 Series User Manual page 256

Setting a Trigger Delay
Setting a Trigger Delay p.167
Operating procedure
Steps Key operation
1 to 5 For moving to "HOLD", see steps 1 to 5 in p.251.
6
7
8
9
10
11
12
13
254
Setting the Output Conditions
Display Description
Press the
key.
Enable the delay.
"DELAY" is displayed on the main display and the current setting
value is displayed on the sub-display.
Press
Select "ON" and press the
Select the delay time.
Press the
key.
Set the delay time.
The current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
In this example, input "10", then press the
The decimal point is displayed.
Press the
Determine the decimal point and then press the
Press the key to return to the previous menu.
Select the sampling time.
Press the
key.
Set the sampling time.
The current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
In this example, input "10", then press the
/ keys to select "DELAY" and press the
/ key to enter editing mode and the sub-display blinks.
key.
/ keys to select "DLY.TIM" and press the
key to enter the editing mode, and the sub-display
/
/ key to move the decimal point.
/ keys to select "SMP.TIM" and press the
key to enter the editing mode, and the sub-display
/
/ / keys.
key.
key.
/ / keys.
key.
ZW-8000/7000/5000
User's Manual