Table of Contents
Advertisement
4
Set the trigger condition.
• When the trigger target is "Data slope"
Item
Setting item
Trigger condition Condition
Judgment
• When the trigger target is "Data window (In)"
Item
Setting item
Trigger condition Judgment value
1
Judgment value
2
• When the trigger target is "Data window (out)"
Item
Setting item
Trigger condition Judgment value
1
Judgment value
2
• When the trigger target is "I/O"
Item
Setting item
Trigger condition Condition
ZW-8000/7000/5000
User's Manual
Range
Description
=
When the measurement results are the same value as the
judgment value, the trigger condition is considered to have
been met.
≠
When the measurement results are a different value from
the judgment value, the trigger condition is considered to
have been met.
>
When the measurement results are greater than the
judgment value, the trigger condition is considered to have
been met.
≥
When the measurement results are greater than or equal to
the judgment value, the trigger condition is considered to
have been met.
<
When the measurement results are less than the judgment
value, the trigger condition is considered to have been met.
≤
When the measurement results are less than or equal to
the judgment value, the trigger condition is considered to
have been met.
-999.999999 to
This is the judgment value for the measurement results.
999.999999 mm
Range
Description
-999.999999 to
When the measurement results are greater than or equal to
999.999999 [mm]
judgment value 1 and less than or equal to judgment value
2, the trigger condition is considered to have been met.
-999.999999 to
999.999999 [mm]
Range
Description
-999.999999 to
When the measurement results are less than judgment
999.999999 [mm]
value 1 or greater than judgment value 2, the trigger
condition is considered to have been met.
-999.999999 to
999.999999 [mm]
Range
Description
TRUE (rising)
When the I/O signal rises, the trigger condition is
considered to have been met.
False (falling)
When the I/O signal falls, the trigger condition is considered
to have been met.
Displaying measured values in graphs
107
Advertisement
Table of Contents
Troubleshooting
