Respironics Trilogy 100 Technical Information page 398

10.10.5T P
RILOGY OST
When testing a Trilogy O
(Step 11) it checks for OBM leaks. The software prompts to read from the Respironics digital
manometer (which leak setting is 25 +/- 0.5 cmH
indicator used for the OBM intake. Effects of this could be to damage the sensor board.
1. Once you have installed the software, open the Auto Flow or Manual Flow Post-Test software from
the shortcut on you desktop, double click the icon to open. You may run the Post-Test indepen-
dently of the Pre-Test for Preventative Maintenance testing.
2. Enter your operator ID, click the Production radio button and click "ENTER".
1002735, V . 05
ER
-T P
EST ROCEDURE
CAUTION
device, during the Oxygen Blending Module (OBM) condition check
2
T S
RILOGY ERVICE
O). It should not be confused with the pressure
2
& T I
ECHNICAL NFORMATION
P 10-95
AGE