Respironics Trilogy 100 Technical Information page 221

3. Connect the Porting Block Adaptor to the Rear Enclosure by tightening the screws to 8 in-lbs.
4. Connect the correct tubing to the proper location on the Porting Block Adaptor.
5. Install the Flow Sensor Assembly. Refer to the Trilogy 100 Flow Sensor Assembly Section or the
Trilogy 200, Trilogy O
P 8-60
AGE
F 8-61: P
IGURE ORTING
Verify that the long arm of the Porting Block Adaptor
goes towards the highest wall of the enclosure.
, & Trilogy 202 Section for more information for more details.
2
T S & T
RILOGY ERVICE
B I
LOCK NSTALLATION
NOTE
I
ECHNICAL NFORMATION
1002735, V . 05
ER