Respironics Trilogy 100 Technical Information page 176

8.3.4 S R
PEAKER EPLACEMENT
Removal
1. Remove the two screws securing the Hold-Down and two cord clips to the Bottom Enclosure.
2. Remove the Speakers from the device.
Installation
1. Place the Speaker in the Bottom Enclosure.
2. Place the Hold-Down into its position in the Bottom Enclosure.
3. With the Bottom Enclosure positioned with the AC Inlet on the right, place the cord clips in their
proper position (the 5/16" cord clip should be positioned on the right and the larger cord clip on the
left).
4. Ensure the Interface Cable is properly routed through the cord clips.
5. Secure the cord clips and hold-down to the Bottom Enclosure by tightening the two screws to 8 in-
lbs.
1002735, V . 05
ER
T S & T
RILOGY ERVICE ECHNICAL
I
NFORMATION
P 8-15
AGE