IBM System x iDataPlex dx360 M4 7912 Service Manual page 55

Problem determination
Table of Contents

Advertisement

CIM Information: Prefix: IMM and ID: 0034
SNMP Trap ID: 22
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1.
Make sure that the certificate that you are importing
is correct.
2.
Try to import the certificate again.
40000023-00000000
Flash of [arg1] from [arg2]
succeeded for user [arg3] .
Explanation: This message is for the use case where
a user has successfully flashed the firmware component
(MC Main Application, MC Boot ROM, BIOS,
Diagnostics, System Power Backplane, Remote
Expansion Enclosure Power Backplane, Integrated
System Management Processor, or Remote Expansion
Enclosure Processor) from the interface and IP address
( %d.
Internal Event: No
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0035
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000024-00000000
Flash of [arg1] from [arg2]
failed for user [arg3].
Explanation: This message is for the use case where
a user has not flashed the firmware component from the
interface and IP address due to a failure.
Internal Event: No
Severity: Info
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0036
SNMP Trap ID: 22
Automatically notify Support: No
User response: Information only; no action is
required.
40000023-00000000 • 40000027-00000000
40000025-00000000
The [arg1] on system [arg2] is
75% full.
Explanation: This message is for the use case where
a Management Controller Event Log on a system is
75% full.
Internal Event: No
Severity: Info
Alert Category: System - Event Log 75% full
Serviceable: No
CIM Information: Prefix: IMM and ID: 0037
SNMP Trap ID: 35
Automatically notify Support: No
User response: Information only; no action is
required.
40000026-00000000
The [arg1] on system [arg2] is
100% full.
Explanation: This message is for the use case where
a Management Controller Event Log on a system is
100% full.
Internal Event: No
Severity: Info
Alert Category: System - Event Log 75% full
Serviceable: No
CIM Information: Prefix: IMM and ID: 0038
SNMP Trap ID: 35
Automatically notify Support: No
User response: To avoid losing older log entries, save
the log as a text file and clear the log.
40000027-00000000
Platform Watchdog Timer
expired for [arg1].
Explanation: This message is for the use case when
an implementation has detected a Platform Watchdog
Timer Expired
Internal Event: No
Severity: Error
Alert Category: System - OS Timeout
Serviceable: No
CIM Information: Prefix: IMM and ID: 0039
SNMP Trap ID: 21
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1.
Reconfigure the watchdog timer to a higher value.
37
Chapter 3. Diagnostics

Advertisement

Table of Contents
loading

This manual is also suitable for:

System x idataplex dx360 m4 7913

Table of Contents