IBM System x iDataPlex dx360 M4 7912 Service Manual page 251

Problem determination
Table of Contents

Advertisement

Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-871-001 Standalone Memory Test Aborted
Explanation: Data Mis-compare encountered.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-871-002 Standalone Memory Test Aborted
Explanation: Data Mis-compare encountered.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
201-871-001 • 201-877-000
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-871-003 Standalone Memory Test Aborted
Explanation: Data Mis-compare encountered.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-877-000 Standalone Memory Test Aborted
Explanation: BIOS: Sparing in Extended PCI reg.
must be OFF. Go to setup and disable sparing.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
233
Chapter 3. Diagnostics

Advertisement

Table of Contents
loading

This manual is also suitable for:

System x idataplex dx360 m4 7913

Table of Contents