IBM System x iDataPlex dx360 M4 7912 Service Manual page 270

Problem determination
Table of Contents

Advertisement

8. Run the test again.
9. If the failure remains, refer to "Troubleshooting by
symptom" in the system "Installation and Service
Guide" for the next corrective action.
Date Message Added: 08/15/2012
Reviewed: 08/29/2012
264-907-000 Tape Test Failed
Explanation: An error was found in the block address
somewhere.
Internal Event: No
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Clean the tape drive using the appropriate cleaning
media and install new media.
Date Message Added: 08/15/2012
Reviewed: 08/15/2012
264-908-000 Tape Test Failed
Explanation: An error was found in getting tape
capacity.
Internal Event: No
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Make sure that medium is present.
2. Clean the tape drive using the appropriate cleaning
media and install new media.
Date Message Added: 08/15/2012
Reviewed: 08/15/2012
252
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

System x idataplex dx360 m4 7913

Table of Contents