Table of Contents
Advertisement
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
218-804-000 Brocade:ExternalEthLoopbackTest
Aborted
Explanation: The test was canceled.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
218-805-000 Brocade:SerdesEthLoopbackTest
Aborted
Explanation: The test was canceled.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
218-806-000 Brocade:InternalLoopbackTest Aborted
Explanation: The test was canceled.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
218-900-000 Brocade:MemoryTest Failed
Explanation: A failure was detected while testing the
adapter memory.
Internal Event: No
Severity: Error
Serviceable: Yes
Recoverable: No
218-804-000 • 218-902-000
Automatically notify Support: No
User response: Complete the following steps:
1. Rerun the test.
2. Verify whether the firmware is at proper level.
3. Rerun the test.
4. If the problem remains, contact your IBM
technical-support representative.
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
218-901-000 Brocade:ExternalLoopbackTest Failed
Explanation: A failure was detected during the
Loopback test.
Internal Event: No
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Check cable connections.
2. Rerun the test.
3. Verify whether the firmware is at proper level.
4. Rerun the test.
5. If the problem remains, contact your IBM
technical-support representative.
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
218-902-000 Brocade:SerdesLoopbackTest Failed
Explanation: A failure was detected during the
Loopback test.
Internal Event: No
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Rerun the test.
2. Verify whether the firmware is at proper level.
3. Rerun the test.
4. If the problem remains, contact your IBM
technical-support representative.
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
197
Chapter 3. Diagnostics
Advertisement
Table of Contents
