Table of Contents
Advertisement
Installing the power cord to the rail with power cord mounting bracket
To install the power cord, complete the following steps:
1. Grasp the end of the power cord with the plug mount molded onto it in your
2. Align the mounting posts on the mounting plate with the slots in the plug mount
3. Position the entire assembly inside the left rail and align the mounting posts with
4. Install the power cord and mounting plate with screws.
5. Connect the power cord that you are working on to a PDU.
6. Install the chassis in the iDataPlex rack (see "Installing the 2U chassis in a rack"
Mounting
plate
Mounting
post
right hand. Notice the shape of the plug and how it matches the cutout in the
mounting plate.
and install the power cord onto the mounting plate.
the holes in the back of the mounting bracket on the rail.
on page 285).
Plug
mount
Chapter 5. Removing and replacing server components
Power cord
mounting bracket
M3
screws
297
Advertisement
Table of Contents
