Table of Contents
Advertisement
806f0207-0301ffff • 806f0223-2101ffff
806f0207-0301ffff
[ProcessorElementName] has
Failed with FRB1/BIST condition. (CPU
1)
Explanation: This message is for the use case when
an implementation has detected a Processor Failed -
FRB1/BIST condition.
Internal Event: No
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
1.
Update the latest level of system firmware and
device drivers are installed for all adapters and
standard devices, such as UEFI, IMM Ethernet,and
SAS. Important: Some cluster solutions require
specific code levels or coordinated code updates. If
the device is part of a cluster solution, verify that the
latest level of code is supported for the cluster
solution before you update the code.
2.
Run the DSA program.
3.
Reseat the adapter.
4.
Replace the adapter.
5.
(Trained technician only) Replace microprocessor
n. (n = microprocessor number)
6.
(Trained technician only) Replace the system
board.
806f0207-0302ffff
[ProcessorElementName] has
Failed with FRB1/BIST condition. (CPU
2)
Explanation: This message is for the use case when
an implementation has detected a Processor Failed -
FRB1/BIST condition.
Internal Event: No
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
1.
Update the latest level of system firmware and
device drivers are installed for all adapters and
standard devices, such as UEFI, IMM Ethernet,and
SAS. Important: Some cluster solutions require
88
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
specific code levels or coordinated code updates. If
the device is part of a cluster solution, verify that the
latest level of code is supported for the cluster
solution before you update the code.
2.
Run the DSA program.
3.
Reseat the adapter.
4.
Replace the adapter.
5.
(Trained technician only) Replace microprocessor
n. (n = microprocessor number)
6.
(Trained technician only) Replace the system
board.
806f0207-2584ffff
[ProcessorElementName] has
Failed with FRB1/BIST condition. (All
CPUs)
Explanation: This message is for the use case when
an implementation has detected a Processor Failed -
FRB1/BIST condition.
Internal Event: No
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
1.
Update the latest level of system firmware and
device drivers are installed for all adapters and
standard devices, such as UEFI, IMM Ethernet,and
SAS. Important: Some cluster solutions require
specific code levels or coordinated code updates. If
the device is part of a cluster solution, verify that the
latest level of code is supported for the cluster
solution before you update the code.
2.
Run the DSA program.
3.
Reseat the adapter.
4.
Replace the adapter.
5.
(Trained technician only) Replace microprocessor
n. (n = microprocessor number)
6.
(Trained technician only) Replace the system
board.
One of the CPUs :
806f0223-2101ffff
Powering off system
[ComputerSystemElementName]
initiated by [WatchdogElementName].
(IPMI Watchdog)
Explanation: This message is for the use case when
an implementation has detected a Poweroff by
Watchdog has occurred.
Advertisement
Table of Contents
