IBM System x iDataPlex dx360 M4 7912 Service Manual page 222

Problem determination
Table of Contents

Advertisement

406-800-000 • 406-901-000
Reviewed: 09/03/2012
406-800-000 IANet:Registers Test Aborted
Explanation: Registers test was canceled.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
406-801-000 IANet:EEPROM Test Aborted
Explanation: EEPROM test was canceled.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
406-802-000 IANet:FIFO Test Aborted
Explanation: FIFO test was canceled.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
406-803-000 IANet:Interrupts Test Aborted
Explanation: Interrupt test was canceled.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
204
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
406-804-000 IANet:Loopback Test Aborted
Explanation: Loopback test was canceled.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
406-900-000 IANet:Registers Test Failed
Explanation: A failure was detected during the
Registers test.
Internal Event: No
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Check component firmware level and upgrade if
necessary. The installed firmware level can be found
in the DSA Diagnostic Event Log within the
Firmware/VPD section for this component.
2. Rerun the test.
3. If failure remains, refer to "Troubleshooting by
symptom" in the system "Installation and Service
Guide" for the next corrective action.
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
406-901-000 IANet:EEPROM Test Failed
Explanation: A failure was detected during the
EEPROM test.
Internal Event: No
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Check component firmware level and upgrade if
necessary. The installed firmware level can be found
in the DSA Diagnostic Event Log within the
Firmware/VPD section for this component.
2. Rerun the test.

Advertisement

Table of Contents
loading

This manual is also suitable for:

System x idataplex dx360 m4 7913

Table of Contents