Table of Contents
Advertisement
816f0025-2c01ffff • 816f0108-0a02ffff
816f0025-2c01ffff
[ManagedElementName]
detected as absent. (Mezz Card)
Explanation: This message is for the use case when
an implementation has detected a Managed Element is
Absent.
Internal Event: No
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0392
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f0028-2101ffff
Sensor [SensorElementName]
has returned to normal on
management system
[ComputerSystemElementName]. (TPM
Cmd Failures)
Explanation: This message is for the use case when
an implementation has detected a Sensor returned from
degraded/unavailable/failure.
Internal Event: No
Severity: Info
Alert Category: Warning - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0399
SNMP Trap ID: 60
Automatically notify Support: No
User response: No action; information only.
816f0107-0301ffff
An Over-Temperature Condition
has been removed on
[ProcessorElementName]. (CPU 1)
Explanation: This message is for the use case when
an implementation has detected a Over-Temperature
Condition has been Removed for Processor.
Internal Event: No
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
138
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
816f0107-0302ffff
An Over-Temperature Condition
has been removed on
[ProcessorElementName]. (CPU 2)
Explanation: This message is for the use case when
an implementation has detected a Over-Temperature
Condition has been Removed for Processor.
Internal Event: No
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0108-0a01ffff
[PowerSupplyElementName] has
returned to OK status. (Power Supply
1)
Explanation: This message is for the use case when
an implementation has detected a Power Supply return
to normal operational status.
Internal Event: No
Severity: Info
Alert Category: Critical - Power
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0087
SNMP Trap ID: 4
Automatically notify Support: No
User response: No action; information only.
816f0108-0a02ffff
[PowerSupplyElementName] has
returned to OK status. (Power Supply
2)
Explanation: This message is for the use case when
an implementation has detected a Power Supply return
to normal operational status.
Internal Event: No
Severity: Info
Alert Category: Critical - Power
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0087
SNMP Trap ID: 4
Automatically notify Support: No
User response: No action; information only.
Advertisement
Table of Contents
