Table of Contents
Advertisement
4. Carefully guide the power supply into the guides until the release latch clicks
5. Install the chassis in the rack (see "Installing the 2U chassis in a rack" on page
6. Reconnect power cords if necessary.
Removing a power supply cage from a 2U chassis
To remove the power supply cage from a 2U chassis, complete the following steps.
Power supply cage
1. Read the safety information that begins vii and "Installation guidelines" on page
2. If the chassis that contains the power supply is installed in a rack, remove it
3. Remove the power supply from a 2U chassis (see "Removing a power supply
4. Make sure that both the 2U chassis fan-assembly top cover (see "Removing the
5. Press the power-supply cage release latch.
6. Carefully pull the power supply cage out from the chassis.
7. If you are instructed to return the power supply, follow all packaging instructions,
320
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
into place.
285) if it had been already removed from the rack.
2U chassis
275.
(see "Removing the 2U chassis from a rack" on page 284).
from a 2U chassis" on page 315).
2U chassis fan-assembly top cover" on page 283) and the 2U chassis fan
assembly (see "Removing the 2U chassis fan assembly" on page 289) are
already removed.
and use any packaging materials for shipping that are supplied to you.
Release latch
Advertisement
Table of Contents
