Alvarion WBSn-2400 System Manual page 69

Chapter 3 - Base Station ManagementServices
Chapter 3 - Base Station Management
3.4.1.6.1 Bandwidth Limitation
This section only applies only if Hotspot Mode is set to an option where a RADIUS server is not required
(see Hotspot Mode in
this section is ignored and relevant limitations should be provided by the RADIUS server.
You may add entries defining limitations for specific users. Each entry consists of the following three
fields:
User's MAC Address: Use the format xx:xx:xx:xx:xx:xx.
DL Speed (kbits/s): The maximal download speed, in kbits/s.
UL Speed (kbits/s): The maximal upload speed, in kbits/s.
There is one default entry that cannot be either deleted or modified:
User's MAC Address: All Others
DL Speed (kbits/s): 5000
UL Speed (kbits/s): 5000
This means that all hotspot users are subjected to 5000 kbits/s bandwidth limitation in both directions.
To prevent any limitation, it may be set to a very high value like 5000000 kbits/s.
3.4.1.6.2 Always Blocked User's List
The Always Blocked User's List can be used to prepare a list of users that will always be blocked from
accessing hotspot service. Each entry in the list consists of a single parameter, User's MAC Address (in
the format xx:xx:xx:xx:xx:xx).
3.4.1.6.3 Authentication Free User's List
The Authentication Free User's List can be used to prepare a list of users (by their MAC Address) that will
not need any authentication at all and can get immediate access to the network. Each entry in the list
consists of a single parameter, User's MAC Address (in the format xx:xx:xx:xx:xx:xx).
WBSn-2400 and WBSn-2450 System Manual
"Hotspot General Settings Page" on page 54). If a RADIUS Server is required,
Services
59