Alvarion WBSn-2400 System Manual page 65

Chapter 3 - Base Station ManagementServices
Chapter 3 - Base Station Management
Hotspot Mode: Selects your required mode of hotspot. You can choose to use the hotspot together
with a third party or external RADIUS authentication server. The available options are:
»
User Name + Password (Radius Required)
»
Agreement (Radius Required)
»
Password (Radius Required)
»
Agreement (Radius not Required)
»
Password (Radius not Required)
Password: Available only if selected mode is Password (Radius not Required). The password to be
used for allowing access to the Internet. You can click on the Reveal/hide password icon (
the right side to hide (the default) or reveal the typed string.
Login Page Title: Sets the title shown on the Login Page, e.g., HotSpot.
Idle Timeout: The timeout in seconds before disconnecting non-active users (unless otherwise set by
the RADIUS server). A value of 0 means unlimited time. The default is 300 seconds.
3.4.1.3 Hotspot Network Page
To access the Hotspot Network page click on the Services>Hotspot>Network tab in the management
function selection panel.
Auto Config: When enabled (the default), Network Address and DNS Server will be configured
automatically based on the settings in the LAN page. Disable only when you want to manually modify
these settings. Auto Config should be enabled prior to modifying the IP parameters of the LAN
interface.
WBSn-2400 and WBSn-2450 System Manual
Figure 3-37: Hotspot Network Page (Auto Config Enabled)
Services
) on
55