Table of Contents
Advertisement
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management
To configure the parameters of a new host name or to modify an existing entry:
1
Enter the host domain name for a local DNS server in the Hostname text field. Do not put www in
the domain name. For example: abcd.com is a valid domain name, www.abcd.com is not acceptable.
2
Click on the IP address text field to open the drop-down list for available IP addresses. The list
includes IP addresses of all potential candidates on your network, plus the "--custom--" option. The
--custom-- option enables manually adding an IP address to the list. Select the appropriate IP address
or enter it manually.
NOTE!
The IP address of the AP should be configured as the preferred DNS server in the devices in your
network in order to interpret these custom hostname(s).
3.5.5
Diagnostics Page
To access the Network Diagnostics page click on the Network>Diagnostics tab in the management
function selection panel.
The Diagnostics enables using the following diagnostic tools:
Ping
Traceroute
Nslookup
WBSn-2400 and WBSn-2450 System Manual
Figure 3-66: Network Diagnostics Page
Network
88
Advertisement
Table of Contents
