Backup / Flash Firmware Page - Alvarion WBSn-2400 System Manual

Chapter 3 - Base Station ManagementSystem
Chapter 3 - Base Station Management
SNMP V2c Read Password: The SNMPv2c community string used for read (get) operations. The
default is public.
SNMP V2c Write Password: The community string used for write (put) operations. Can also be used
for read (get) operations. The default is private.
SNMP V3 Username: The name assigned to the SNMPv3 user for authentication purposes. The
default is admin.
SNMP V3 Auth Algorithm: Read-only. The authentication algorithm used, e.g., MD5.
SNMP V3 Auth Password: The password for user authentication (default: password). You can click
on the Reveal/hide password icon (
string.
SNMP V3 Privacy Algorithm: Read-only. The data encryption algorithm used, e.g., DES.
SNMP V3 Privacy Password: The password for data encryption (default: password). You can click on
the Reveal/hide password icon (
3.3.4.2.2 Trap
The Trap tab includes the following parameters:
Enable SNMP Trap: Select (the default) to enable the SNMP agent to send events notifications to the
SNMP Trap manager.
SNMP Trap IP Address: The IP address of the SNMP Trap manager which receives the trap messages.
SNMP Trap Port: The SNMP Traps port number (default is 162).
3.3.5

Backup / Flash Firmware Page

To access the Backup / Flash Firmware page click on the System>Backup / Flash Firmware tab in the
management function selection panel.
The Backup / Flash Firmware page includes the following sections:
Backup / Restore
Flash new firmware
WBSn-2400 and WBSn-2450 System Manual
Figure 3-30: System SNMP Page, SNMP Configuration Section, Trap Tab
) on the right side to hide (the default) or reveal the typed
) on the right side to hide (the default) or reveal the typed string.
System
48