Table of Contents
Advertisement
Chapter 3 - Base Station ManagementSystem
Chapter 3 - Base Station Management
System
Figure 3-34: System Reboot Page
Click on the Perform reboot link to reboot the device. This is similar to a power-off / power-on cycle.
The system configuration remains the same. However, changes that were not applied (using the Save &
Apply button) will be lost. If there are any such changes, a suitable warning message will be displayed.
3.3.7
Diagnostics Page
To access the System Diagnostics page click on the System>Diagnostics tab in the management
function selection panel.
Figure 3-35: System Diagnostics Page
The Diagnostics page enables preparing diagnostics compressed TAR files (tar.gz) that may be sent to the
support team of the supplier for advice on solving problems.
Click on the Tech Support button to create and save a compressed TAR file with detailed information
regarding current configuration and possible problems.
Click on the KPI files button to create and save a compressed TAR file with detailed information on KPI
(Key Performance Indicators).
The file's name includes information on file's type (TechSupport/KPI), device's name and date and time at
which the file was created.
WBSn-2400 and WBSn-2450 System Manual
52
Advertisement
Table of Contents
