Alvarion WBSn-2400 System Manual page 60

Chapter 3 - Base Station ManagementSystem
Chapter 3 - Base Station Management
CAUTION If the Keep IP checkbox is unchecked (the default), then after the device reverts to the factory default
configuration (including management IP parameters and other parameters related to management) you
may loose the ability to remotely manage the device.
Check the Keep IP checkbox before clicking on the Perform reset button to revert to the factory
default configuration excluding parameters required for maintaining remote management connectivity.
3.3.5.1.3 Restoring a previously saved configuration file
To restore a previously saved backup file:
1
Click on the Browse button and navigate to the location of the required backup file.
2
The path to the selected file will be displayed next to the Browse button.
3
Click on the Upload archive... button. You will be requested to confirm the action.
After confirmation the system will upload the backup file and reboot. After reboot the uploaded backup
file will be used as the running configuration file.
3.3.5.2 Flash new firmware
Figure 3-32: System Backup / Flash Firmware Page, Flash new firmware Section
In the Flash new firmware section you can upload a new firmware file that will be used as the running
version.
To upload a new firmware file:
1
Verify that the required file is available on your PC.
2
Click on the Browse button and navigate to the location of the required firmware file.
3
The path to the selected file will be displayed next to the Browse button.
4
Click on the Flash firmware... button. You will be requested to confirm the action.
After confirmation the system will upload the firmware file and reboot. After reboot the uploaded
firmware file will be used as the running firmware file.
WBSn-2400 and WBSn-2450 System Manual
System
50