Table of Contents
Advertisement
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management
Leasetime: The expiry time of leased addresses, including static leases if applicable (see
below). You can specify leasetime in minutes (such as 2m for a two minutes leasetime), hours (such as
12h which is the default for a 12 hours leasetime), or days (such as 7d for seven days leasetime).
3.5.1.2.5.2
Advanced Settings
Figure 3-51: Network Per Interface Page, DHCP Server Section, General Setup Tab
The Advanced Settings tab includes the following parameters:
Dynamic DHCP: Check (the default) to enable dynamic allocations of DHCP addresses for clients. If
disabled, only clients having static leases (see
Force: Check to respond to DHCP requests on this network even if another DHCP server is detected.
The default is unchecked, meaning that if another DHCP server is detected the built-in DHCP server
will not respond to DHCP requests on this network.
IPv4-Netmask: By default, the IP netmask used in DHCP IP addresses allocations is the netmask
specified for the network. If necessary, you can define a different IP netmask to be used in addresses
allocations. The default is null (use the default netmask).
DHCP Options: You may optionally define a list of additional DHCP options to be advertised to
clients. In each comma separated string you should specify the option code and relevant value(s). For
example, to use option 6 (Domain Name Server) to advertise one or more DNS servers (in order of
priority) to clients, specify the string "6,<IP_address_1>,<IP_address_2>...".
WBSn-2400 and WBSn-2450 System Manual
Static Leases
below) will be served.
Network
Static Leases
71
Advertisement
Table of Contents
