Table of Contents
Advertisement
Chapter 3 - Base Station ManagementServices
Chapter 3 - Base Station Management
The parameters that become available when Auto Config is disabled are:
Network Address: The default address and netmask prefix are derived from the network address of
the LAN interface.
DNS Server 1 and DNS Server 2: The default for both is the management IP address of the AP.
3.4.1.4
Hotspot RADIUS Page
To access the Hotspot RADIUS page click on the Services>Hotspot>RADIUS tab in the management
function selection panel.
WBSn-2400 and WBSn-2450 System Manual
Figure 3-38: Hotspot Network Page (Auto Config Disabled)
Figure 3-39: Hotspot RADIUS Page
Services
56
Advertisement
Table of Contents
