Alvarion WBSn-2400 System Manual page 34

Chapter 3 - Base Station ManagementUsing the Web-Based Element Management System
Chapter 3 - Base Station Management
Grayed-out fields are read-only. This may be due to the particular parameter being either a read-only
parameter or because another parameter must be changed to enable read-write access for the required
parameter.
The options / value range available for certain parameters depend on the current option/value set for
NOTE!
other values. For example, the available options for the Channels parameter depend on the currently
applied option for the Regulatory Domain. In certain cases you may have to apply a change and refresh
the displayed information for viewing current options/range of other parameters. For example, after
changing the Channel parameter you should apply the change and refresh the display to view the
correct range for the Tx Power parameter.
3.1.2.3.2 Managing Configurable Lists
There are two types of configurable lists:
A Single Elements List
A Multiple Elements List
3.1.2.3.2.1 A Single Elements List
To add an entry to the list, click on the + sign on the right side of the last entry.
To remove an entry from the list, click on the x sign on the right side of the entry (the first entry cannot
be removed, it can only be cleared).
NOTE!
Certain single elements lists are managed using the Add and Delete buttons as described in
Elements List
WBSn-2400 and WBSn-2450 System Manual
Figure 3-3: A Single Elements List
below.
Using the Web-Based Element Management System
A Multiple
24