Table of Contents
Advertisement
Chapter 2 - CLI Commands
snmp-server trap web-login
Supported on: Wi² AP
snmp-server trap web-login
Send a trap each time an administrator login is accepted.
no snmp-server trap web-login
Do not send a trap each time an administrator login is accepted.
snmp-server trap web-logout
Supported on: Wi² AP
snmp-server trap web-logout
Send a trap each time an administrator logs out.
no snmp-server trap web-logout
Do not send a trap each time an administrator logs out.
web admin kickout
Supported on: Wi² AP
web admin kickout
Enables a new administrator login to terminate an existing administrator
session.
no web admin kickout
Stops a new administrator from logging in until an existing administrator
logs out.
web allow
Supported on: Wi² AP
web allow <ip address>/<mask>
Adds an address to the list of hosts that can access the management tool.
no web allow <ip address>/<mask>
Removes the specified address from the list of hosts that can access the
management tool.
Parameters
<address>
</mask>
world-mode dot11 country code
Supported on: Wi² AP
world-mode dot11 country code <code>
Specifies the country the Wi² AP is operating in.
26
IP address.
Subnet mask in CIDR format. Specifies the number of
bits in the mask.
Wi² AP CLI Reference Guide
Advertisement
Table of Contents
