Alvarion WBSn-2400 System Manual page 96

Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management
The VLANs page enables defining the rules for forwarding traffic between wireless networks and the
Ethernet interface (eth0).
One rule is defined by default, with a null VLAN ID. This is the transparent VLAN forwarding rule,
defining that all traffic, excluding packets tagged with a VLAN ID to which any wireless network is
assigned, will be forwarded between the Ethernet interface and all wireless networks that are not
assigned as untagged to any VLAN ID (All Others). This rule cannot be either deleted or modified
(excluding the Description).
NOTE!
At any given moment, the "All Others" list includes all wireless networks that are not assigned as
untagged to any VLAN ID, taking into account possible configuration changes such as adding a new
wireless network or cancelling assignment of a wireless network as untagged.
To define a new VLAN forwarding rule, click on the Add button to add a new entry and configure the
following parameters:
VLAN ID: The VLAN ID (from 2 to 4094).
Priority: The 802.1p based Priority Code Point applied to outgoing packets when a VLAN tag is
added. The range is from 0 to 7, the default being 0.
Untagged Bridge WIFI: Click on the definition box to open the wireless network(s) selection dialog
box. Select (check) the wireless network(s) to be assigned to the VLAN ID as untagged. You may click
on the Check all/Uncheck all options to simplify the selection/de-selection process.
WBSn-2400 and WBSn-2450 System Manual
Figure 3-64: Network VLANs Page
Network
86