Alvarion WBSn-2400 System Manual page 104

Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management
Deauthentication request timeout (seconds): If the RADIUS server indicates that the device is not
allowed to connect to the BSS/ESS, the AP can allow the device some time to download a notification
page (URL included in the message). This parameter sets that timeout in seconds. The default is null
(0).
Operating Class Indication: The Operating Class Indication provides information on the channels
and frequency band(s) used by the AP(s) in the hotspot. Passpoint APs may be aware of operating
class information (without additional configuration) based on the radio frequency (RF) band
capabilities of the individual AP. In a multi-AP hotspot venue, the Hotspot Operator may configure
additional information describing the operating classes in use by other APs in the venue having the
same SSID. The device may use operating class information to make network selection decisions. If a
device supports more than one frequency band (e.g., 5 GHz as well as 2.4 GHz), it may use this
information to select a hotspot operating in the 5 GHz band if this is the preferred band and it is
available.
For details on available operating class indications refer to Table E-4 (Global operating classes) in IEEE
802.11-2012 Annex E.
The default list includes two operating classes: 81 (channel starting frequency 2.407GHz, channel
spacing 25MHz, channel set: 1-13) and 115 (channel starting frequency 5GHz, channel spacing
5MHz, channel set: 36, 40, 44, 48).
3.5.6.2.2 Operator Name
The Operator Name includes a list of one or more names in different human languages. This allows the
device to display the Operator Friendly Name in alternate languages based on the language selected in
the setting of the mobile device. Friendly names can and should be provided in several human languages
when the hotspot is located in a country having more than one national language (e.g., Switzerland) or,
for example, in locations having a lot of international travelers (e.g., airports). The mobile device will
choose from the provided human languages the best choice to display to the user.
The Operator Name section includes the following parameters for each entry:
Operator Friendly Name: The name of the Hotspot Operator.
Encoding: A drop-down list of languages, allowing to identify the language used for defining the
Operator Friendly Name. The default is English.
WBSn-2400 and WBSn-2450 System Manual
Figure 3-69: Network Passpoint Profile # Page, Operator Name Section
Network
94