Table of Contents
Advertisement
Chapter 3 - Base Station ManagementAPController
Chapter 3 - Base Station Management
NOTE!
The SNMPv3 AP to APC settings may differ from the settings of the standard SNMPv3 parameters (see
"SNMP Page" on page
The SNMPv3 AP to APC parameters are:
User Name: The name assigned to the SNMP user. The default is admin.
Auth Password: The password used for authentication using the MD5 protocol. A string of at least 8
characters. The default is password. You can click on the Reveal/hide password icon (
right side of the text field to hide (the default) or reveal the typed string.
Privacy Password: The password used for encrypting the SNMP traffic using the CBC-DES protocol.
A string of at least 8 characters. The default is password. You can click on the Reveal/hide
password icon (
NOTE!
The SNMPv3 AP to APC settings in the device must match the settings in the Arena controller used for
managing it.
WBSn-2400 and WBSn-2450 System Manual
46) used for any other purpose.
) on the right side of the text field to hide (the default) or reveal the typed string.
APController
) on the
104
Advertisement
Table of Contents
