Alvarion WBSn-2400 System Manual page 59

Chapter 3 - Base Station ManagementSystem
Chapter 3 - Base Station Management
Firmware Banks
3.3.5.1 Backup / Restore
In the Backup / Restore section you can execute the following actions related to management of
configuration files:
Saving the current configuration file
Restoring the factory default configuration
Restoring a previously saved configuration file
3.3.5.1.1 Saving the current configuration file
To generate and download a tar archive of the current configuration files:
Click on the Generate archive button.
The backup file will be downloaded to your PC (either to the Downloads directory or to a selectable
location - depending on the browser used). The default file name is "backup-AP-<Date>.tar".
3.3.5.1.2 Restoring the factory default configuration
To revert to the factory default configuration:
Click on the Perform reset button.
A confirmation request message will be displayed. After confirmation the device will reboot and restart
running with the default configuration.
WBSn-2400 and WBSn-2450 System Manual
Figure 3-31: System Backup / Flash Firmware Page, Backup / Restore Section
System
49