Temperature Controller Module Operation; Temperature Controller (Tec) Module; Introduction; Installation - Newport 8000 User Manual

C H A P T E R
4.

Temperature Controller Module Operation

4.1

Temperature Controller (TEC) Module

4.1.1

Introduction

The 8300 and 8600 Series Temperature Control Modules are precision
thermoelectric cooler control modules for use in the 8000 Modular Controller. It
may be installed in any of the channel slots on the rear of the 8000, and may be
interchanged with any other.
Features of the 8300 and 8600 Series include:
•
Service-free modularity (calibration information is stored on the module)
•
Close-case calibration
•
Operational with most thermistors, IC and RTD temperature sensors
•
Flexible setup with 8000 Save/Recall front panel functions
•
High temperature stability
•
Current Limit
4.1.2

Installation

This section describes the procedures for installing and removing a Model 8000
compatible module from the 8000.
To install the module into the 8000, follow these steps:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4
The save/recall bin information will be lost upon detecting
any change in the module configuration (such as installing
a new module).
CAUTION
Although ESD protection is designed into the module,
operation in a static-fee work area is recommended.
CAUTION
Do not plug-in or unplug a module with
the AC power on.
45
NOTE