Controller State Diagram - Newport SMC100CC Manual

SMC100CC & SMC100PP
EDH0310En1030 – 01/17
1.3

Controller State Diagram

The SMC100 controller is defined by the following state diagram.
End of Runs encountered in the following state:
NOT REFERENCED: No action.
CONFIGURATION:
HOMING:
MOVING:
READY:
DISABLE:
Controller's LED display:
NOT REFERENCED: If everything is OK then
NOT REFERENCED: If hardware faults or wrong parameters then
NOT REFERENCED: If end of runs then
CONFIGURATION:
READY:
DISABLE:
HOMING:
MOVING:
JOGGING:
No action.
Only check at end of HOMING and then change to NOT
REFERENCED state.
Abort motion and then change to NOT REFERENCED state.
Change to NOT REFERENCED state.
Change to NOT REFERENCED state.
SLOW BLINK
SLOW BLINK RED.
SOLID GREEN.
SLOW BLINK GREEN.
FAST BLINK GREEN.
FAST BLINK GREEN.
FAST BLINK GREEN.
2
Controller GUI Manual
SOLID ORANGE.
SOLID
ORANGE.
RED.