Table of Contents
Advertisement
No.
230
Stop Mode
231
Manual Mode
232
Reserved
233
Auto Mode
234
Generator Load
235-239
Reserved
240-279
PLC Flag 1-40
280-299
Reserved
8.2.2
DEFINED PERIOD OUTPUT
Defined period output is composed by 2 parts, period output S1 and condition output S2.
While S1 and S2 are TRUE synchronously, OUTPUT;
While S1 or S2 is FALSE, NOT OUTPUT.
Period output S1, can set generator's one or more period output freely, can set the delayed time and output
time after enter into period.
Condition output S2, can set as any conditions in output ports.
NOTE: when delay time and output time both are 0 in period output S1, it is TRUE in this period.
Example,
Output period: start
Delay output time: 2s
Output time: 3s
Condition output contents: output port 1 is active
Close when condition output active/inactive: close when active (disconnect when inactive);
Output port 1 active, after enter "starts time" and delay 2s, this defined period output is outputting, after 3s, stop outputting;
Output port 1 inactive, defined output period is not outputting
8.2.3
DEFINED COMBINATION OUTPUT
Defined combination output is composed by 3 parts, OR condition output S1, S2, AND condition output S3.
S1 or S2 is TRUE, while S3 is TRUE, defined combination output is outputting;
S1 and S2 are FALSE, or S3 is FALSE, defined combination output is not outputting.
NOTE: S1, S2, S3 can be set as any contents except for "defined combination output" in the output setting.
NOTE: 3 parts of defined combination output (S1, S2, S3) couldn't include or recursively include themselves.
Example,
Contents of OR condition output S1: output port 1 is active;
Close when OR condition output S1 is active /inactive: close when active (disconnect when inactive);
Contents of OR condition output S2, output port 2 is active;
HGM9510 Genset Parallel Controller User Manual
Type
Action in Stop mode.
Action in Manual mode.
Action in Auto mode.
Description
.
Page 44 of 68
Advertisement
Table of Contents
