Key Function Description - Smartgen HGM9510 User Manual

5.2

KEY FUNCTION DESCRIPTION

Icon
Stop
Start
Manual Mode
Auto Mode
Mute/Reset Alarm
Close
Open
Up/Increase
Down/Decrease
Left
Right
Set/Confirm
Exit
NOTE: Press
be judged according to crank disconnect conditions, operator will have to crank the starter motor manually; when operator
decides that the engine has fired, he/she should release the button and start output will be deactivated, safety on delay will be
initiated.
HGM9510 Genset Parallel Controller User Manual
Table 6 Key Function Description
Button
Stop running generator in Auto/Manual mode; Lamp test (press at
least 3 seconds); Reset alarm in stop mode; During stopping
process, press this button again to stop generator immediately.
Start genset in Manual mode.
Press this key and controller enters in Manual mode.
Press this key and controller enters in Auto mode.
Alarming sound off; If trip alarm occurs, pressing the button at
least 3 seconds can reset this alarm.
Close breaker in manual mode.
Open breaker in manual mode.
1) Screen scroll;
2) Up cursor and increase value in setting menu.
1) Screen scroll;
2) Down cursor and decrease value in setting menu.
1) Page scroll;
2) Left move cursor in setting menu.
1) Page scroll;
2) Right move cursor in setting menu.
Select viewing area.
1) Return to main menu;
2) Return to previous menu in setting menu.
and simultaneously in manual mode will force generator to crank. Successful start will not
Description
Page 12 of 68