Table of Contents
Advertisement
1
OVERVIEW
HGM9510 controller is designed for manual/auto parallel system generators with similar or different capacity.
Additionally, it is suitable for single unit constant power output and mains paralleling. It allows automatic
start/stop, parallel running, data measurement, alarm protection as well as remote control, remote
measurement and remote communication function. It fits with LCD display, optional Chinese, English and other
languages interface, and it is reliable and easy to use.
Utilizing the GOV (Engine Speed Governor) and AVR (Automatic Voltage Regulator) control function, the
controller is able to synchronize and share load automatically; it can be used to parallel with other HGM9510
controller.
HGM9510 controller also monitors the engine, indicating the operational status and fault conditions accurately.
When abnormal condition occurs, it splits bus and shuts down the genset, simultaneously the exact failure
mode information is indicated by the LCD display on the front panel. SAE J1939 interface enables the
controller to communicate with various ECU (ENGINE CONTROL UNIT) which fitted with J1939 interface.
The powerful 32-bit microprocessor contained within the module allows for precision parameters measuring,
fixed value adjustment, time setting and set value adjusting and etc. Majority parameters can be configured
from front panel, and all parameters can be configured by USB interface (or RS485) to adjust via PC. It can be
widely used in all types of automatic gen-set control system with compact structure, advanced circuits, simple
connections and high reliability.
HGM9510 Genset Parallel Controller User Manual
Page 6 of 68
Advertisement
Table of Contents
