Smartgen HGM9510 User Manual page 9


Parameter setting: parameters can be modified and stored in internal EEPROM memory and cannot be lost
even in case of power outage; most of them can be adjusted using front panel of the controller and all of
them can be modified using PC via USB or RS485 ports;

Multiple crank disconnect conditions (speed sensor, oil pressure, generator frequency) are optional;

Widely power supply range DC(8~35)V, suitable to different starting battery voltage environment;

Event log, real-time clock, scheduled start & stop generator (can be set as start genset once a
day/week/month whether with load or not);

Accumulative total run time and total electric energy of A and B. Users can reset it as 0 and re-accumulate
the value which make convenience to users to count the total value as their wish.

Can control engine heater, cooler and fuel pump.

With maintenance function. Actions (warning, trip and stop, shutdown) can be set when maintenance time
out;

All parameters used digital adjustment, instead of conventional analog modulation with normal
potentiometer, more reliable and stable;

IP55 waterproofness level can be achieved with the help of rubber-ring gasket between shell and control
panel;

Metal fixing clips enable perfect in high temperature environment;

Modular design, self-extinguishing ABS plastic shell, pluggable terminal, built-in mounting，compact
structure with easy installation.
HGM9510 Genset Parallel Controller User Manual Page 9 of 68