Table of Contents
Advertisement
No.
41
NEL Manual Recon
42
Power Management Mode
43
Mains Parallel Mode
44
First Priority
45
Reserved
46
Reserved
47
Alternative Config1
48
Alternative Config2
49
Alternative Config3
50
Reserved
51
Speed Up
52
Speed Down
53
Voltage Up
54
Voltage Down
55
Reserved
56
Low Coolant Level
57
Detonation Shutdown
58
Gas Leak Shutdown
59
Reserved
60
Reserved
HGM9510 Genset Parallel Controller User Manual
Type
function description please see the following.
Power management mode will be displayed on the LCD when
the input is active. In this mode, the controller will control genset
synchronize, power sharing, scheduled start, scheduled stop,
generator closed, generator opened but genset start or stop.
Details of function description please see the following.
The genset will output constant power when the input is active.
It is the highest priority when the input is active. Used for
main/standby genset selection.
The alternative configuration is active when the input is active.
Users can set different parameters to make it easy to select
current configuration via input port.
Connect with water level sensor digital input port.
Connect with detection module warn input port.
Connect with detection module warn input port.
Description
Page 47 of 68
Advertisement
Table of Contents
