Smartgen HGM9510 User Manual page 15

On load, off load or custom commissioning can be chosen. Custom commissioning can configure on load or
not during commissioning, when to commissioning and select the mode after commissioning (manual mode,
auto mode and stop mode).
Clear users' accumulation

Can clear total run time A and B, total electric energy A and B.
Parameter setting including as following,
 Timer settings
 Engine settings
 Generator settings
 Load settings
Breaker settings

Analog sensor settings

Input port settings

 Output port settings
Module settings

 Scheduling and maintenance settings
Synchronization settings

 Expansion module settings
HGM9510 Genset Parallel Controller User Manual Page 15 of 68