6. Repeat Step
3., page 94
right deflector (A).
7. Align deflectors at position (B) and tighten bolts (C) to
specified torque with a 16 mm socket and an 8 mm
hex key.
3.16.8 Tall Crop Divider Option
Tall crop dividers (one on each end of the mower conditioner) assist in clean crop dividing and cutterbar entry in tall
crops. Tall crop dividers are not adjustable, but they are removable.
Removing Tall Crop Divider
DANGER
Stop engine and remove key from ignition before leaving Operator's seat for any reason. A child or even
a pet could engage an idling machine.
1. Lower mower conditioner fully, shut down tractor and
mower conditioner, and remove key.
2. Open cutterbar doors.
169820
OPERATION
to Step
to install
5., page 94
Figure 3.111: Right Cutterbar Deflector Viewed
from Underside of Cutterbar
Figure 3.112: Cutterbar Doors
95
Revision A