Tall Crop Divider Option; Installing Tall Crop Divider - MacDon R85 Operator's Manual

4.12 Tall Crop Divider Option

Tall crop dividers (one on each end of the header) assist in clean crop dividing and cutterbar entry in tall crops. Tall
crop dividers are not adjustable, but they are removable.

4.12.1 Installing Tall Crop Divider

To install the tall crop divider kit (MD #B5509), follow these steps:
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
1. Lower header fully.
2. Stop the engine, and remove the key.
3. Unpack kit.
4. Open cutterbar doors. Refer to
page 33.
5. Remove four bolts (A) from divider (B).
NOTE:
Mounting holes in header should be vacant. Remove
fasteners, if necessary.
214366
OPERATING THE HEADER
3.5 Cutterbar Doors,
108
Figure 4.38: Cutterbar Doors
B
Figure 4.39: Tall Crop Divider Kit (Left Shown,
Right Side Opposite)
A
Revision A