Tall Crop Divider Option; Installing Tall Crop Divider - MacDon R85 Operator's Manual

4.12 Tall Crop Divider Option

Tall crop dividers (one on each end of the header) assist in clean crop dividing and cutterbar entry in tall crops. Tall
crop dividers are not adjustable, but they are removable.

4.12.1 Installing Tall Crop Divider

To install the tall crop divider kit (MD #B5509), follow these steps:
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
1. Lower header fully.
2. Stop the engine, and remove the key.
3. Unpack kit.
4. Open cutterbar doors. Refer to
page 33.
5. Remove the four bolts (A) from the divider (B).
NOTE:
Mounting holes in header should be vacant.
Remove fasteners, if necessary.
214014
OPERATING THE HEADER
3.5 Cutterbar Doors,
107
Figure 4.34: Cutterbar Doors
Figure 4.35: Tall Crop Divider Kit (LH Shown,
RH Opposite)
Revision B