Cleaning The Cis Imager; Cleaning The Flatbed Glass (S2085F/S3060F/S3100F Scanners Only) - Kodak S3120 Max User Manual

Cleaning the CIS Imager

Cleaning the flatbed glass
(S2085f/S3060f/S3100f
Scanners only)
54
14. Wipe the upper and lower imaging area using a Brillianze Detailer wipe
(Step 1) or Staticide wipe. Be careful not to scratch the imaging area when
cleaning.
15. Wipe the upper and lower imaging area again using a Brillianize wipe (Step
2) or an almost dry Staticide wipe to remove any streaks.
16. Close the scanner cover.
17. When finished with all cleaning procedures, turn on the scanner.
The flatbed's glass platen can collect fingerprints and dust. Use Staticide
Wipes for KODAK Scanners or Brillianize Detailer Wipes to clean the glass
platen.
1. Open the flatbed cover.
2. Wipe the glass platen with a Brillianize wipe (Step 1) or Staticide wipe.
3. Dry the glass platen with a Brillianize wipe (Step 2) or almost dry Staticide
wipe.
4. Close the flatbed cover.
IMPORTANT: Do not spray or pour cleaning liquids on the flatbed's glass
platen, as these liquids may seep under the glass and cause
damage.
A-61981 20 April 2022