Advanced Easysetup Considerations - Kodak ScanMate i1150WN User Manual

Advanced EasySetup
considerations
A-61854 April 2016
Creating an EasySetup Configuration page can be done by selecting
the Print EasySetup page on the Network tab. The EasySetup
Configuration page displays the current setup that will be encoded in
the encrypted 2D barcode image. This information is displayed in the
table at the bottom of the dialog box; the field names are in the left
column and their current values are in the right column.
The configuration settings used to create the EasySetup Configuration
page do not have to be the same as the configuration settings that are
applied to the scanner accessing the website. For example, you may
want to have different settings when a user who is in a different location
needs a different configuration than the person creating the EasySetup
Configuration page.
The person responsible for creating the EasySetup Configuration page
may be an IT person for a remotely located user who does not know
how to configure their scanner on their corporate network.The IT
person uses the i1150WN/i1190WN Scanner Setup website to create
the EasySetup Configuration page for the remote user. After the
settings are configured, print or save the EasySetup Configuration page
to either give or email to the remote user.
IMPORTANT:
• If you only want to apply these settings to other scanners, and not to
your scanner, do not click Save on the Network tab.
• If you want to apply these settings to your scanner as well as other
scanners, click Save on the Network tab.
2-29