Rotary Disc-Only Configuration - Quick Coupler Connections - MacDon R113 Unloading And Assembly Instructions

8. Pull platform (A) toward the cab until it stops and the latch
is engaged.
9. Calibrate the header on the windrower. For instructions,
refer to 6.2.4 Calibrating M2 Series Windrower and Header
™
on HarvestTouch Display, page
6.2.3 Rotary Disc-Only Configuration – Quick Coupler Connections
The rotary disc-only configuration allows the windrower to operate with compatible rotary disc headers. Attaching the
header's hydraulic connections to the windrower's ports using quick couplers does not require any additional tools or
hardware.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
CAUTION
Do NOT stand on an unlocked platform. It is unstable and may cause you to fall.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (fixed and
movable) hydraulic couplers.
1. Shut down the engine, and remove the key from the ignition.
2. Approach platform (A) on the left side of the windrower.
Ensure that the cab door is closed.
3. Push latch (B) and pull platform (A) toward the walking
beam until it stops and the latch engages.
262300
ATTACHING HYDRAULIC AND ELECTRICAL COMPONENTS
76.
Figure 6.23: Left Platform
Figure 6.24: Left Platform
73
A
A
B
1015479
Revision A