Javad TRIUMPH-VS Operator's Manual page 46

Description and Operation
Base and Rover Setup
Base Station Configuration
23. Press Action button
tap Stop.
24. Now base station is configured. Please do not move it!
25. In the Action screen ensure the base station is transmitting corrections:
26. To disable Base station, after finishing the work, tap SettingsGNSSTransmit Data (Base), and
set UHF modem format to None. Otherwise the base station operation will continue.
46
, to switch to Command screen and tap Start. To stop the base operation
Figure 74. Command screen
Figure 75. Base station is transmitting corrections
www.javad.com