Javad TRIUMPH-VS Operator's Manual page 37

2. Tap Settings and specify what SIM card will be used for data transfer, enter PIN code and
additional settings.
3. Now the password to access to the base should be specified. Tap Communication Network
Services TCP server.
4. Set server parameters, port and password, tap Apply:
5. The modem is configured. The receiver should be configured now for transmit corrections to
rover(s).
www.javad.com
Figure 50. SIM card settings
Figure 51. Network Services
Figure 52. TCP server parameters
Description and Operation

TCP server
Base and Rover Setup
Base Station Configuration
37